State of Play

It’s been another rollercoaster week, and I’d be a liar if I didn’t say it was 90% or more good news.

First of all, all my paranoid rantings about surveys proved groundless on this occasion. The valuation survey approved the buyers mortgage, and this morning I sent signed contracts to our solicitors. So that’s all good ... well fantastic really.

The buyers are waiting for some searches to come back (I don’t know what and from where). Then we should be able to firm up a date for moving. Right now today, we could in theory move out on the first weekend of June ... there is of course still some fall through room (but one doesn't want to countenance it if one doesn't have to). We can’t move the second weekend because we are at a wedding, and on the third weekend of June the Moho goes to be fitted out.

We’ve changed our temporary accommodation venue to my brothers flat in Southend, as my mother is having issues with “Wet Macular Degeneration” in one of her eyes and needs a bit of peace and quiet while it gets managed by Moorefields eye hospital (and in all fairness I don’t come with peace and quiet as a default setting).

Finally the future Moho is nearly finished being painted. So as a picture speaks a thousands words, I’ll just shut up and show the pictures so far.

Have a splendid weekend.

Ttfn

http://www.carbodyrepairsrainham.co.uk/

Stripped

The Rot

The rot cut out

The rot plated and welded

Filled and primed

Base Coat applied

Top Coat

http://www.carbodyrepairsrainham.co.uk/

And now we wait until next Tuesday or Wednesday to get it back ... and then before it's fitted out, we use it to move house.

What a fortnight it has been.

So we bought the new van home and put it in for a service and Cam Belt change ... £2000 odd pounds later we have: a new Cam Belt, Oils, filters, Brake pads and disks (front), front wheel bearings, brake shoes and cylinders (rear), water pump, water pump pulley, crank shaft seal, x4 Injector seals and the offside indicator lamp cluster (front). So that was expensive. But it doesn’t stop there, there is a bracket for the glide-rite air suspension that has rusted through (possibly). I’m hoping that it isn’t too serious, or that it’s a false positive (our mechanics couldn’t be 100% sure having no explicit expertise in this particular arena). We are prepared for another bigish bill and possibly an overnight stay near to the installers workshop.

Are we regretting buying the unit already? Yes and no. The body work is spotless from the Cills up. Our mechanics say the engine is sound given the mileage, and that the service items mean that absolutely all major consumables have been looked after and are good for several thousand miles (oil needs changing every five thousand) at least.

I started tinkering with the internal space and trim and decided in a very short amount of time that the best way forward was to rip it out completely and start again. Now this may seem like a bizarre thing to do, seeing as one of the buying points was that it had been fitted out already. However, in ripping it out one has revealed pristine internal metalwork (except around the windows mentioned in the previous posts, and way down where the Cills join the main panel work). At this juncture there is rust, and frankly you have to wonder at Vauxhall’s manufacturing process and quality control, that this rust is effectively designed in.

At the points where the external bump trim fixing bolts penetrate the outer shell, they have not provided adequate rust protection, either by the physical fixing, or by additional coatings. On the old Talbot, which was seven years older than this Vauxhall, you could still see the hard glaze lacquer that formed a rim around every single body penetrating fixing, consequently there wasn’t a spot of rust on it. The visible rust doesn’t penetrate to the supporting uprights, but will require some grinding out and then either a  plate or some Isopon P40 fibreglass mat and a skim of Isopon P38 to finish. Fortunately the entire area of rust is under the bump trims that line the side ... not that that’s an excuse for doing a bodge job, it just takes the pressure off when t comes to painting and flatting.

If there is a big disappointment, then it’s the fact that the middle offside window rim is rusted right through and has been patched in a way that quite frankly makes me very cross: One because I’m going to have to fix it, and subtly underneath that, the fact that the unit was an NHS ambulance and we already paid for it to be looked after via the treasury ... and some lazy fucking turd somewhere just gobbed it up with some silicone, then layered on paint  with a trowel... and probably billed you and I for what probably looked like a proper job for a few months.

On from this I’ve made some grand discoveries: The heater is a Mikuni diesel unit, fully plumbed into the main fuel tank. There is a top of the line split charge relay unit and a deep cycle marine battery already installed. The battery provides the juice to the Glide-rite system and to all the secondary systems. There is an electrical distribution panel just behind the drivers seat that provides service to the blue lights, most of it is redundant in terms of terminations, but the board itself and its fuse carriers are re-usable (not that these are expensive items, it’s just good that they are not on a future shopping list). And finally for the electricals everything is run in flexible conduit.

I have now reached a stopping point with regards to what I can do, I need the air suspension to be serviced this is booked in for the 12^th of April. I then have to sort out the bodywork, before I can think about re-insulating and lining the unit with new ply. I can augment the under bonnet insulation and clean in the engine bay ... but to be entirely fair, these are nothing more than “keeping your hand in” jobs. So that’s March 2013 gone, on square forty hoping for a six next throw and no more snakes.

The deed is done.

On Friday 1^st March after a haggle I managed to get the ambulance for £2500. Pictures below; they are rough as I had to use my phone because I’ve misplaced the charger for my snapping camera … (one suspects it has been boxed in error, and placed in the lockup). They will suffice for examples sake. I didn’t get a second test drive, as the dealer thought my absence since the first look more than a fortnight ago, meant I’d decided not to buy it, so he tucked it back into a corner.

I had hoped to get it for £2300, however he’s done his research as well as I have, so he had a fair idea of the value of the blown air heating system and panelling to someone like myself, and therefore wouldn’t budge. He even had the cheek to say he was going to advertise it as a conversion option on Gumtree … now we’d suggested it. It has sat in his yard for just over a year, and no one could find a use for it. It has too few seats to be a minibus, and too many to be a van, couple that with the panelling and the only person likely to show an interest is me … or a serial killer looking for some sound proofing … hmmmm.

Do I think I’ve got a good deal? The jury is out. We are taking a risk, quite a big one in fact. The equation breaks down like this.

For:

Van already panelled with high quality materials (could do with a valet, but it’s by no means shabby).

No major rust, no rust inside doors seals

Easy access to the rears of the sound proofing/insulation panels, for augmenting the insulation.

Floor already floored.

High level cabinets (not wipe clean medical white … this is a good thing).

Diesel blown air central heating (needs to be shifted.

Four tinted sliding windows in the rear panels

Semi High top with full height rear opening doors

3.6 metres of internal length

Sliding side door (unglazed)

90% of the body is in very good nick (bubbly rust round one rear window, not a biggy)

Secondary 12v systems installed and adaptable

Five pages of service history

Years MOT

Roof light fitted already, direct replaced by the ones we bought for Moho Mk1 last year.

Clutch, Alternator, starter motor, Disks and pads, Cam belt kit all easily available, and relatively inexpensive (and looking at the layout all relatively easy to access).

Parts generally available widely, some Nissan, and Renault parts are 100% like for like (the Renault Master and Nissan Interstar are the same vehicle).

Our man Paul at Blackdown has converted at least four of these units and thinks they make a great base vehicle (as Renault, Nissan and Movano … The unit he’s just built is a 2012 Movano).

Against:

300.000 miles on the clock.

Bubbly rust round one rear window (badly patched up … see line above, to do it properly I need to take the window out).

Poorly removed blue light near and offside rear, and poor patch up of area (needs to be done properly and it’s very visible).

A ding that looks like it could be part of the sliding door run at the bottom of the sill (it would fool a stupid person … ahem).

Air suspension, compressor (this may have to be removed).

One could say that one has a bias towards the for’s (rose tinted glasses), however if one looks at the Against then purely in terms of cost they probably cancel each other out. However if the 300k miles bites us in the arse it could get quite expensive short term. If the worst came to the worst I will just have the engine reconditioned top to bottom no questions asked.

I hope to pick it up on Saturday 16^th march, I’m off for a week after that and I shall root through it with a fine tooth comb, book it in for a service and cam belt change and give it a clean and wax.

Down But Not Out

Yet again we have been quiet for a week or two, but in the background things have been happening. I didn’t have to complain to the highest level of Direct Line, in fact once they pulled their finger out they actually move very quickly. That isn’t to say that it’s good news, the motor home has been written off, as we suspected it would. There were a number of deciding factors: the age of the vehicle, the fact that the chassis is ladder format means that any twisting would require the entire body to be removed, and it couldn’t be assured of being jigged back to form (of course this in itself  would be massively expensive). The damage to the front near side suspension turret was a good indicator that the chassis had moved from square to a parallelogram http://en.wikipedia.org/wiki/Parallelogram (for those that may not know that shape). The ding in the front of the chassis only compounded the issue of the chassis being true, as the front damage is on the opposite corner of the motorhome.

The deal we’ve struck is a compromise, as things always are. We’ve been paid out £500 less than the insured value. We have to buy back the carcass to extract our brand new equipment. Had we removed it prior to the assessment as everyone said we should do, to protect our investment and to re-use it we would have lost all the value, but it does sting that we have to buy back that which we paid over £2000 pounds for less than a year ago. Insurance companies don’t like paying out.
What do we do now? Well I started scheming the very next day after the accident. I was up at our local petrol station, and happened to espy a 13 year old Vauxhall Movano 3500 PTS Ambulance (Passenger Transport Service) in a small commercial van sellers yard. It’s long, very long, It’s white, it’s got 300000 miles on the clock ... that’s a lot of miles, a really huge amount of miles. However research says that a new engine complete would cost £1500 and about the same to fit it. The clutch, Alternator, Starter Motor, Disks and Pads are all under £200, as are the piston rings, shell bearings etc, so a re-build while a big job, isn’t in itself hugely expensive ... he says while remembering he’s skint from last year and all the work on the previous motorhome ... and he wants to start from scratch again ... you’d have thought he’d learned his lesson?

So there’s this ambulance, it’s 50cm longer than the Elddis, though not as wide. It is panelled and insulated, it has a blown air central heating system (they cost between £500 and £1300), It has tinted windows down both sides. It’s a semi high top with double rear doors and side access.
I’m under no illusion that it is a project. However I have already reserved the services of Blackdown conversions for the end of May. Paul was as sick as a parrot on our behalf for the loss of the Elddis, but on the Brightside he says the Movano is a great base to convert from. Our usual mechanic has said don’t touch it with a barge pole because of the mileage. My mate Rob he knows a thing or two about vans took it for a test drive a few hours after I had driven it myself, and said it felt very good for its age and mileage; I to was very pleasantly surprised when I drove it (after speaking to the guy who reconditioned the Elddis, I was ready to give up on the Movano).

The advantage to the Movano is that it has a service history as long as your arm, every A or B service, tyre change, replaced light bulb, brake pad and even the loss of an offside mirror have been recorded. Though this pales into insignificance against the critical service parts “Timing Belt and Cam Belt”, both are recorded as changed ... don’t care ... still going to get them replaced again. Did you see the hint there? The decision has been made, this Friday I’ll haggle over the asking price after taking one last look over the potential new wagon, I want to check the roof rails for rust and I want another drive from cold; that means turning up unannounced which only new car dealers are happy about. I’ll post again when I know more.